First off, I didn't invent this. It's been around for years. What I did come up with is the pre-requisite shot that you have to master to get it to work. I have to give the credit to Grady Matthews. Hanging around him, I have learned how he looks at shots and analyses them. I believe that he is one of the greatest minds in the game today, maybe ever. I have trouble with the shot myself so, as a test case I taught it to an APA ranked six in eight ball and he could do it in five minutes. So here goes. Let me know how you do with it. I am still looking for an easier way.
Step #1:
99% of all the one pocket breaks I have ever seen the head ball is hit too thick. So, first you have to be able to do this cut shot or it will never work.
START(
%AN7O5%Pg8Z0%WN9D3%XN6O4%YO4P7%Zg6Z0%eC4`4
)END
The one ball must hit the rail at or above(the thin side) of the middle diamond. If you can't do it consistently, forget it. You'll never get this break to work. Get this shot grooved before you go to step two or you'll just frustrate yourself.
Step #2:
Years ago I was shown this one pocket break exercise but, I never got it to work. Recently, I picked it up again and I discovered Step #1 that makes it all possible. Take three balls and put them in a triangle. The actual shot is to cut the one ball to one inch below the middle diamond. This will vary from table to table, but never more than one inch thicker or thinner. I know I just told you to practice a shot which is too thin. The reason is when you get other balls involved, you are going to hit it too thick. If you have already grooved the capability to hit it too thin, it is easier to back off to the thick side, than to go from too thick to thin enough. When you cut the one ball correctly, the corner ball will go straight in the corner pocket.
START(
%AN7O5%EM7P1%HM7N8%Ph1Z3%WO2P5%Xh0Z4%YN3B8%ZN8O2%[D0D1%\M7N7
%eC2`5
)END
How to judge misses. This shot has built in feed back about how you hit the shot. This is the shot when the one ball is hit too thick.
START(
%AM1I4%EE7Q0%HE7H9%Ph1Z3%WO2P5%Xh0Z4%YL3B9%ZN8O2%[C0F6%\M7N7
%eC2`5
)END
The corner ball will head to the foot rail. This will be most of the misses.
This is the shot missed too thin.
START(
%AN7O5%EG0O6%HG8D6%Ph1Z3%WO2P5%Xh0Z4%YO6B6%ZN8O2%[F8C4%\M7N7
%eC2`5
)END
The corner ball will go to the side rail. This is missing to the good side.
Step #3:
When you make the corner ball, of the three ball rack, twice in a row. Rack up all fifteen and do the same thing. For some reason, that I don't understand, the fifteen ball rack will react in exactly the same way as the three ball rack. The corner ball will go in the corner and when you miss, the corner ball will go to the same rails that it did in the three ball rack.
The racks don't have to be perfect, just decent. There seems to a margin of error that I don't understand either. Even if you don't make the ball, you will be able to consistently throw the corner ball right at (within a half diamond) of the corner pocket and in one pocket a ball in the door is as good as made.
Step #1:
99% of all the one pocket breaks I have ever seen the head ball is hit too thick. So, first you have to be able to do this cut shot or it will never work.
START(
%AN7O5%Pg8Z0%WN9D3%XN6O4%YO4P7%Zg6Z0%eC4`4
)END
The one ball must hit the rail at or above(the thin side) of the middle diamond. If you can't do it consistently, forget it. You'll never get this break to work. Get this shot grooved before you go to step two or you'll just frustrate yourself.
Step #2:
Years ago I was shown this one pocket break exercise but, I never got it to work. Recently, I picked it up again and I discovered Step #1 that makes it all possible. Take three balls and put them in a triangle. The actual shot is to cut the one ball to one inch below the middle diamond. This will vary from table to table, but never more than one inch thicker or thinner. I know I just told you to practice a shot which is too thin. The reason is when you get other balls involved, you are going to hit it too thick. If you have already grooved the capability to hit it too thin, it is easier to back off to the thick side, than to go from too thick to thin enough. When you cut the one ball correctly, the corner ball will go straight in the corner pocket.
START(
%AN7O5%EM7P1%HM7N8%Ph1Z3%WO2P5%Xh0Z4%YN3B8%ZN8O2%[D0D1%\M7N7
%eC2`5
)END
How to judge misses. This shot has built in feed back about how you hit the shot. This is the shot when the one ball is hit too thick.
START(
%AM1I4%EE7Q0%HE7H9%Ph1Z3%WO2P5%Xh0Z4%YL3B9%ZN8O2%[C0F6%\M7N7
%eC2`5
)END
The corner ball will head to the foot rail. This will be most of the misses.
This is the shot missed too thin.
START(
%AN7O5%EG0O6%HG8D6%Ph1Z3%WO2P5%Xh0Z4%YO6B6%ZN8O2%[F8C4%\M7N7
%eC2`5
)END
The corner ball will go to the side rail. This is missing to the good side.
Step #3:
When you make the corner ball, of the three ball rack, twice in a row. Rack up all fifteen and do the same thing. For some reason, that I don't understand, the fifteen ball rack will react in exactly the same way as the three ball rack. The corner ball will go in the corner and when you miss, the corner ball will go to the same rails that it did in the three ball rack.
The racks don't have to be perfect, just decent. There seems to a margin of error that I don't understand either. Even if you don't make the ball, you will be able to consistently throw the corner ball right at (within a half diamond) of the corner pocket and in one pocket a ball in the door is as good as made.